Laboratory Temperature Sensor Accessories
Suitable for PyroScience sensors
Calibration capsules
Optical-fibres
Silicon glue
Adaptor rings
Temperature Sensor Accessories
- Fibre optic sensors
- Sensor spots
- Flow through cells
- Vials
Request Information
Temperature Fibre Optic Sensors
TPSC Additional Sensor Screw Caps
Additional optical temperature sensor screw caps for simple exchange of the temperature sensitive sensor (PU = 2 pieces) of the TPSC
Temperature Sensor Spots
SPFIB-BARE Optical Fibre
- For contactless sensor readout
- Optical fibre core Ø = 1mm
- Ca. 1m length
- With ST-connector and bare fibre end
- To measure through 0-2mm thick materials
SPADBAS Basic spot adapter
- For contactless sensor readout
- Compatible to SPFIB-BARE, PICFIB2 or PICROD2
- Can be glued with SPGLUE for fixation
- PU = 4 units
SPGLUE Silicone Glue
- Transparent silicone glue Elastosil E43, (ca. 90 ml)
- For fixing sensor spots or SPADBAS at container walls
Temperature Flow Through Cells
SPFIB-BARE Optical Fibre
- For contactless sensor readout
- Optical fibre core Ø = 1mm
- Ca. 1m length
- With ST-connector and bare fibre end
- To measure through 0-2mm thick materials
PICFIB2 Fibre for Contactless Readout
- Fibre diameter Ø = 2mm
- With PICO-connector, ca. 1m length
- To measure oxygen and optical temperature sensor spots through 0-10mm thick transparent windows
- To measure pH sensor spots through 0-5mm thick transparent windows
Temperature Vials
ADVIAL20 Adapter Ring
- Adapter ring for 20mL vials with up to 3 sensors
- Compatible to SPFIB-BARE and PICFIB2
ADVIAL20-KIT Adapter Ring Kit
This kit for 20ml respiration vials contains:
- 4 x optical fiber SPFIB-BARE-CL2
- 4 x Adapter ring ADVIAL20
SEPVIAL20 Septa and lids for 20 ml sensor vials
- Septa with lids (with and without hole)
- For replacement in 20mL sensor vials from PyroScience
- PU = 4 pieces
OXCAL 0% O2 Calibration Capsules
For recommended 0% O2 calibration of optical oxygen sensors. Each capsule results in 50mL calibration solution (PU=10).
SPFIB-BARE Optical Fibre
- For contactless sensor readout
- Optical fibre core Ø = 1mm
- Ca. 1m length
- With ST-connector and bare fibre end
- To measure through 0-2mm thick materials