Laboratory Oxygen Sensor Accessories
Suitable for PyroScience sensors
Fibre-optic sensor accessories
Flow-through cell accessories
Oxygen vial accessories
Calibration capsules
Accessories for Oxygen Sensors
- Fibre-Optic Sensors
- Sensor Spots
- Flow-Through Cells
- Vials
- Nanoparticles
Request Information
Oxygen Fibre-Optic Sensors
OXCAL 0% O2 Calibration Capsules
For recommended 0% O2 calibration of optical oxygen sensors. Each capsule results in 50mL calibration solution (PU=10).
ADPATCH Adhesive Sticker Patches
- For piercing with protected O2 minisensors
- 10 pieces, transparent, Ø15mm
SPFIB-BARE Optical fibre
- For contactless sensor readout
- Optical fibre core Ø = 1mm
- Ca. 1m length
- With ST-connector and bare fiber end
- To measure through 0-2mm thick materials
SPADBAS Basic spot adapter
- For contactless sensor readout
- Compatible to SPFIB-BARE, PICFIB2 or PICROD2
- Can be glued with SPGLUE for fixation
- PU = 4 units
PICFIB2 Fibre for Contactless Readout
- Fibre diameter Ø = 2mm
- With PICO-connector, ca. 1m length
- To measure oxygen and optical temperature sensor spots through 0-10mm thick transparent windows
- To measure pH sensor spots through 0-5mm thick transparent windows
PICROD2 Fibre Rod for Contactless Readout
- Stainless steel tube Ø = 3mm
- With PICO-connector, ca. 40mm length
- To measure oxygen and optical temperature sensor spots through 0-10mm thick transparent windows
- To measure pH sensor spots through 0-5mm thick transparent windows
SPGLUE Silicone Glue
- Transparent silicone glue Elastosil E43, (ca. 90 ml)
- For fixing sensor spots or SPADBAS at container walls
OXCAL 0% O2 Calibration Capsules
For recommended 0% O2 calibration of optical oxygen sensors. Each capsule results in 50mL calibration solution (PU=10).
SPFIB-LNS Optical Fibre with Lens
- For contactless sensor readout
- Ca. 1m length
- Through thick walled containers
- Compatible to SPADBAS
- With ST-connector for FireSting devices
Oxygen Flow-Through Cells
OXCAL 0% O2 Calibration Capsules
For recommended 0% O2 calibration of optical oxygen sensors. Each capsule results in 50mL calibration solution (PU=10).
SPFIB-BARE Optical fibre
- For contactless sensor readout
- Optical fibre core Ø = 1mm
- Ca. 1m length
- With ST-connector and bare fiber end
- To measure through 0-2mm thick materials
PICFIB2 Fibre for Contactless Readout
- Fibre diameter Ø = 2mm
- With PICO-connector, ca. 1m length
- To measure oxygen and optical temperature sensor spots through 0-10mm thick transparent windows
- To measure pH sensor spots through 0-5mm thick transparent windows
Oxygen Vials
ADVIAL20 Adapter Ring
- Adapter ring for 20mL vials with up to 3 sensors
- Compatible to SPFIB-BARE and PICFIB2
ADVIAL20-KIT Adapter Ring Kit
This kit for 20ml respiration vials contains:
- 4 x optical fibre SPFIB-BARE-CL2
- 4 x Adapter ring ADVIAL20
SPFIB-BARE Optical fibre
- For contactless sensor readout
- Optical fibre core Ø = 1mm
- Ca. 1m length
- With ST-connector and bare fiber end
- To measure through 0-2mm thick materials
OXCAL 0% O2 Calibration Capsules
For recommended 0% O2 calibration of optical oxygen sensors. Each capsule results in 50mL calibration solution (PU=10).
SEPVIAL20 Septa and lids for 20 ml sensor vials
- Septa with lids (with and without hole)
- For replacement in 20mL sensor vials from PyroScience
- PU = 4 pieces
PHCAL2 Calibration Capsules (pH 2)
For obligatory acid calibration of optical pH sensors. Each capsule results in 100mL calibration solution (PU=10).
PHCAL11 Calibration Buffer Capsules (pH 11)
For recommended basic calibration of optical pH sensors. Each capsule results in 100mL calibration buffer solution (PU=10)..
Oxygen Nanoparticles
PHCAL11 Calibration Buffer Capsules (pH 11)
For recommended basic calibration of optical pH sensors. Each capsule results in 100mL calibration buffer solution (PU=10)..
PICROD2 Fibre Rod for Contactless Readout
- Stainless steel tube Ø = 3mm
- With PICO-connector, ca. 40mm length
- To measure oxygen and optical temperature sensor spots through 0-10mm thick transparent windows
- To measure pH sensor spots through 0-5mm thick transparent windows
PICROD2-LNS Optical Fibre Rod with Lens
- Stainless steel tube Ø = 3, length = 41mm
- With PICO-connector and focusing lens
- For microfluidic applications
PICFIB2 Fibre for Contactless Readout
- Fibre diameter Ø = 2mm
- With PICO-connector, ca. 1m length
- To measure oxygen and optical temperature sensor spots through 0-10mm thick transparent windows
- To measure pH sensor spots through 0-5mm thick transparent windows
PICFIB2-LNS Readout Fibre with Lens
- Stainless steel tip Ø = 3mm, ca. 1m length
- With PICO-connector and focussing lens
- For microfluidic applications