Automated Fish Quality Control
The BioSystems Y15 measures histamine and sulfites
Measure over 25 quality parameters
Easier and more economical than immunoassay or HPLC
Highly cost efficient, long shelf life reagents
Continous sample loading
Automated Analysis
BioSystems provides rapid, low-cost, high-sensitivity analysis of key substances in fish and seafood products. The Y15 automated fish analyser features continuous sample loading to streamline laboratory tasks. User-friendly software and a flexible and simple interface make it a versatile fish analyser that can adapt to any need. It is also available with a cooling system (Y15c) to increase the onboard stability of reagents and ensure a constant temperature.
Parameters: Sulfites, Histamine
Sulphite
Sulphite analysis consists of a simple validated extraction in crustaceans and a rapid reaction with minimal reagent use. The kit includes the extraction buffer and calibrator, making it very easy to use compared with other methodologies, and shows excellent correlation with the official method (Monier-Williams).
Histamine
Histamine analysis consists of a simple validated extraction and a rapid reaction with minimal reagent use. The system includes calibrators and is more economical and easier to use than expensive methods like immunoassay or HPLC. The Histamine Kit for automated procedure has been certified as AOAC Performance Tested Method SM #072001.
Tests on fish oil for peroxide value, p-anisidine value and free fatty acids are also available on the FoodLab.
Try Before You Buy
The Y15 is available for a demonstration or a short term trial.
Request Information
Subscribe to our Food newsletter
The Y15c version is equipped with a cooling system whih ensures a constatnt temperature, increasing the onboard stability of the reagents
The new software is designed to optimize every step of your workflow
Download Literature
Specification
Speed: 150 cycles per hour
Mean Throughput: 60 results per hour
Samples Loading: Continuous
Pre and Post Dilution: Automatic
Reagents and Bottles: Dedicated for the analyser.
Water Consumption: 0.5-1 Litres per hour
Positions for Racks (Reagents or Samples): 4 or 2 in Y15c
Rack Samples Capacity: 24 samples position/rack
Maximum Capacity of Samples: 72 or 48 in Y15c
Barcode reader: External
Size of Primary Tubes: Ø 13mm or 15mm, maximum height 100mm
Sample Well Diameter: 13mm
Sample Types: Grape juice, sulfited grape juice, white wine, rosé wine, red wine
Dispensing Pump: Ceramic pump of high durability
Dispensing Tip: Stainless steel 110 mm
Level Detection: Capacitative
Sample Pipetting Volume: From 2 μL to 80 μL
Pipetting Resolution: 0.1 μL
Predilution Ratio: From 1:2 to 1:40
Tip Wash: Inside and outside
Volume of Reagent Bottles: 20 mL, 50 mL
Reagents Rack Capacity: 10 bottles
Cooled Reagent: Available on Y15c, 20 reagents maximum
Temperature Range of Cooler: 10 ºC below room temperature at 25 ºC
R1 Reagent Volume: 10 μL to 550 μL
R2 Reagent Volume: 10 μL to 200 μL
Dispensing Mode: Ceramic pump
Pipetting Resolution: 1 μL
Reaction Volume Range: From 180 μL to 800 μL
Number of Wells: 120
Well Material: UV methacrylate
Type of Incubation: Dry
Temperature: 37.0 °C
Temperature Accuracy: ±0.2 °C
Light Source: Halogen lamp 6V, 10W
Lightpath: 6 mm
Wavelengths: 340 – 405 – 420 – 520 – 560 – 600 – 620 – 635 – 670 nm (1 additional filter can be added by user)
Wavelenght Accuracy: ±2 nm
Spectral Range: 340 – 900 nm
Photometric Range: -0.05 to 3.0 A
Photometric Detection System: Silicon photodiode
Internal Resolution: <0.0001 A
Baseline Stability: 0.004 A max., 30 minutes at 505 nm
System Liquid Solution Bottle Fluid Requirement: 3 Litres
Washing Solution Bottle Fluid Requirement: 3 Litres
Waste Solution Bottle Fluid Requirement: 3 Litres
Size: W 840 x D 670 x H 615 mm
Weight: 45 Kg
Mains Voltage: 115 to 230 V
Mains Frequency: 50 or 60 Hz
Electric Power: 500 VA
Ambient Temperature: From 10 to 35 °C
Relative Humidity: <75%
Altitude: <2500 metres