Jar Testing Drinking Water and Wastewater
What is Coagulation-Flocculation?
Coagulation-flocculation are techniques used in the treatment of drinking water and wastewater. They remove suspended solids, dissolved substances and organic pollutants from water. Coagulation neutralises charges on suspended particles and Flocculation binds the suspended solids together, thus preparing the source water for further treatment.
Increasing natural organic matter concentration and variable source water quality is creating a challenge to this operation. The treatment process is complicated by seasonal shifts such as snow and rain, climate change, whilst storm water intensification can contribute to variable source water quality.
If a treatment plant does not know the correct treatment doses, they risk overdosing or underdosing. Too little coagulant will not clear the water of contaminants, too much is chemically unsafe for public health.
How does Jar Testing Optimise Coagulation-Flocculation?
Jar testing simulates the process with variable doses to determine the optimal treatment for different conditions. It is a critical procedure for the optimisation of coagulation-flocculation treatment in terms of:
- Coagulant dosing
- Cost
- Performance
Jar testing is time consuming and material intensive, which delays the release of untreated water from storage. It has low data throughput, relies on end-point sampling, requires manual handling and can be prone to error.
Optimizing Jar Testing with Mantech
Mantech, in collaboration with Dalhousie University, has developed the first automated, high-throughput jar testing system. It features additional capabilities to address the issues with the process. Mainly applicable to drinking water, the system can also be utilized in wastewater treatment. The system is described in the poster Revolutionizing Jar testing – An Automated, High-throughput Approach, presented by Dalhousie University at the ACWAA conference.
Mantech’s jar testing system is capable of:
- Performing user-defined jar testing procedures
- Multi-channel analysis of up to 6 jars at once, with a capacity of 6-40 jars
- Customizable coagulant dosing volumes
- Automatic pH adjustment
- Multiple flocculant cycles
- Continuous measurement of pH and conductivity
- Multiparameter analysis such as turbidity, COD and more for initial, post-coagulant addition, final and settled jar testing results
- Reporting of pre-treatment, post-coagulant addition and pH adjustment, continuous post-treatment and settled parameters
By enhancing a treatment plant’s adaptability and resilience to the challenges of increasing natural organic matter concentration and water quality variability, the system delivers multiple benefits to operators. By automating customizable dosing and multiple flocculant cycles, operators can save time and reduce manual handling and human error.
30/10/26
