Autoclaves
Autoclaves are supplied almost ready for immediate use. All that is required is an electricity supply, drain line and mains water supply (autofill models only). Designed in accordance with BS2646 part 1 and EN61919-2-41 1996, the chambers and doors are constructed using the highest quality stainless steel and the control circuits are low voltage and well insulated for safety and reliability. All are designed and built to BS5500 Cat 3.
   

Gemini
The Gemini uniquely combines two popular vessels into one robust frame, ideal for any busy laboratory. The space-saving design means it can be used as a clean and dirty autoclave in one frame. The Gemini is available in an electrically heated version or from a piped steam source. An integrated steam generator is available as well as an air ballasting option.

  • 2 x 158 litre vessels
  • MP 25 controller
  • Independent control of each chamber
  • Integral drip tray under each door
  • Fan accelerated cooling
  • Hydraulic loading trolley
  • Loading baskets
  • Waste discard system
  • Drain line condenser for plastic drains
  • Range of cycle recording systems
  • Scale prevention systems
  • Automatic fill
  • Vacuum air removal system
   
             
              Gemini
Direct Steam
Gemini
Electric

Crystal
The Crystal is a powerful workhorse combining large capacity with clever space-saving design features designed to save you time and money in the running of your laboratory. The Crystal also features an air ballasting option.

  • 200, 250 and 300 litre variants
  • MP 25 controller
  • Square section chamber
  • Cost effective hinge / bolt door
  • Fixed seal Integral drip tray under door
  • Efficient fan assisted cooling
  • Loading trolley
  • Scale prevention systems
  • Waste discard system
  • Range of cycle recording systems
   
             
              Crystal
Direct Steam
Crystal
Electric

Sapphire
The Sapphire is powerful, unique, reliable and state of the art. It is ideally suited for heavy duty work where capacity and reliability are key. The space-saving design features accelerated water cooling by means of a water jacket. The Sapphire is available in stainless steel and features an air ballasting option.

  • 330, 440, 550, 660 and 770 litre variants
  • MP 25 controller
  • Reliable hoist and clamp door
  • Fixed seal
  • Square section chamber
  • Loading trolley
  • Waste discard system
  • Range of cycle recording systems
  • Drain condenser for plastic drains
  • Scale prevention systems
  • Vacuum air removal systems
  • Additional loading baskets

Sapphire Double Door Pass Through
Available in 550, 660 and 770 litre variants, the double ended Sapphire range offers a versatile work horse, with various options such as an integrated boiler, liquid ring vacuum and our recently developed steam drying jacket. This model brings all the regular benefits of the Sapphire series to the larger CAT2 & CAT3 laboratories, addressing cross partition clean and dirty side requirements.

  • 550, 660 and 770 litre options
  • MP25 controller
  • Square chamber
  • Automatic mechanically hoisted sliding door (not pneumatic)
  • Fixed seal
  • Integral drip tray under door
  • Accelerated water cooling by means of a water jacket
  • Double interlocked door for pass through operation
  • Steam jacket option
  • Loading trolleys and transfer carriage accessories
  • Liquid ring vacuum option
   
       
        Sapphire
330 & 440 Ltr
Direct Steam
Sapphire
330 & 440 Ltr
Electric
Sapphire 550,
660, & 770 Ltr
Direct Steam
Sapphire 550,
660, & 770 Ltr
Electric
Sapphire
Double Ended

Ambassador
The Ambassador is a heavy duty autoclave that is designed to meet the needs of any busy laboratory with nine different variants.

  • 100, 125 and 158 litre variants
  • MP 25 controller
  • Automatic fill
  • Automatic drain and re-fill
  • Scale prevention systems
  • Waste discard system
  • High speed fan accelerated cooling
  • Range of cycle recording systems
  • Air removal HEPA filter
  • Air ballasting
  • Loading trolley & baskets and trays
  • Vacuum air removal
   
           
            Ambassador
Direct Steam
Ambassador
Electric with
In-Chamber
Heating
Ambassador
Electric with
Steam
Generator

Monarch
The Monarch is ideal as an under-bench solution. It has unique space saving ideas which include a flip up control panel that features the MP 25 controller.

  • 50 and 75 litre variants
  • MP 25 controller
  • Flip-up control panel
  • Exceptionally low loading height
  • Excellent load capacity for up to 3 baskets
  • Additional loading baskets
  • Waste discard system
  • High speed fan accelerated cooling
  • Condense collector which eliminates a drain requirement
  • Air removal HEPA filter
  • Cycle data recorders
   
               
                Monarch

Ensign
The Ensign is a robust and reliable autoclave, ideal for any mid-sized laboratory that needs a configurable workhorse they can rely on for smooth operation.

  • 100 and 125 litre variants
  • MP 25 controller
  • Single or 3-phase supply
  • Additional loading baskets
  • Automatic fill
  • Automatic drain and re-fill
  • Scale prevention systems
  • Waste discard system
  • High speed fan accelerated cooling
  • Range of loading hoists
  • Vacuum air removal system
  • Range of cycle recording systems
  • Air removal HEPA filter
   
             
              Ensign
Direct Steam
Ensign
Electric

Phoenix
The Phoenix is the ideal compact autoclave for any small scale operation that needs reliable functionality without losing valuable space.

  • 40 or 60 litres
  • MP25 controller
  • Single phase plug and play
  • Capacity of up to 13 x 1 litre bottles
  • Phoenix 40 fits on standard bench
  • Integral drip tray
  • Grade 316 stainless steel chamber
  • Anti door bolt over tight mechanism
  • Complete versatility for almost any application
  • Option of integrated vacuum system
   
               
                Phoenix
 
 
Autoclaves