LactoScope FTIR Advanced
 
Operation
1/ Select product to be analysed by single clicking on the chosen product.
 
 
2/ Place the sample pipette in the sample container, ensuring there is sufficient sample for the measurement.
3/ Click the measure button, or press the red button on the left hand side of the FTA.
 
 
4/ The sample prepare wizard will open, type Sample ID (if applicable) and click finish.
 
 

5/ The LactoScope will start the analysis. After analysis the result will be shown on screen.

6/ Remove the sample from the pipette.

7/ The LactoScope will automatically clean after 3 minutes, or a clean can be started by clicking the Clean/Rinse button at the top of the screen.