Hotplates and Heating Mantlets

Single Heater EV1
This compact powerful 450W heater can be used for a wide variety of applications. The powder coated steel frame has a preformed hole for the insertion of a support rod. The 85mm diameter top plate can be extended by the addition of an interchangeable 120mm diameter aluminium top plate. The larger top plate can accommodate bottles, flat bottom flasks or beakers up to 2 litres. Round-bottomed flasks up to 750ml can also be accommodated by the addition of aluminium flask holders and air bath inserts.

Maximum Temperature 425°C
Dimensions 150W x 225D x 110H mm
Electrical 230V AC, 50/60Hz, 450W
Weight 2Kg

Serial Heaters EV14 and EV16
Four and six position EV hotplates as described above. Each position is 450W with individual power / heat control and excess current switch.

Model EV14 EV16
Maximum Temperature 425°C 425°C
Dimensions 600W x 225D x 110H mm 900W x 225D x 110 H mm
Electrical 230V AC, 50/60Hz, 1800W 230V AC, 50/60Hz, 2700W
Weight 7Kg 10Kg

Single Heater Mantlet KI 1
This compact powerful 450W heater with power/heat control and excess current switch can be used for fast heating of round bottomed flasks. The powder coated steel frame has a preformed hole for the insertion of a support rod. The curved tubular heating element can hold flasks from 50 - 250ml. For heating by convection air bath inserts may be used. Single

Heater Mantlet KI 2
This larger more powerful 580W heater with power/heat control and excess current switch can be used for fast heating of large round bottomed flasks up to 1 litre. The powder coated steel frame has a preformed hole for the insertion of a support rod. The curved tubular heating element can hold flasks from 250 - 1000ml. For heating by convection air bath inserts may be used.

   
Model KI 1 KI 2
Maximum Temperature 600°C 650°C
Dimensions 150W x 225D x 130H mm 150W x 225D x 130H mm
Electrical 230V AC, 50/60Hz, 450W 230V AC, 50/60Hz, 580W
Weight 2Kg 2Kg

Serial Heating Mantlet KI
16 A six-position KI heating mantle for 50 -250ml flasks. Each position is 450W with individual power / heat control and excess current switch. The powder coated steel frame has six preformed holes for the insertion of support rods. For heating by convection air bath inserts may be used.

Serial Heating Mantlet KI
24 A four-position KI heating Mantle for 250 – 750ml flasks. Each position is 580W with individual power / heat control and excess current switch. The powder coated steel frame has four preformed holes for the insertion of support rods. For heating by convection air bath inserts may be used.

   
Serial Heating Mantlet KI
26 A six-position KI heating Mantle for 250 – 750ml flasks. Each position is 580W with individual power / heat control and excess current switch. The powder coated steel frame has six preformed holes for the insertion of support rods. For heating by convection air bath inserts may be used. Please note three-phase power is required for this unit.
   
Model KI16 KI24 KI26
Maximum Temperature 600°C 650°C 650°C
Dimensions 600W x 225D x 130H mm 600W x 225D x 130H mm 900W x 225D x 130H mm
Electrical AC, 50/60Hz, 1800W 230V AC, 50/60Hz, 2320W 400V AC 3N, 50/60Hz, 3480W
Weight 7Kg 7Kg 10Kg